Current File : //proc/self/root/proc/self/root/usr/share/automake-1.13/tap-driver.pl
#! /usr/bin/env perl
# Copyright (C) 2011-2013 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
# ---------------------------------- #
# Imports, static data, and setup. #
# ---------------------------------- #
use warnings FATAL => 'all';
use strict;
use Getopt::Long ();
use TAP::Parser;
my $VERSION = '2012-02-01.19'; # UTC
my $ME = "tap-driver.pl";
my $USAGE = <<'END';
Usage:
tap-driver --test-name=NAME --log-file=PATH --trs-file=PATH
[--expect-failure={yes|no}] [--color-tests={yes|no}]
[--enable-hard-errors={yes|no}] [--ignore-exit]
[--diagnostic-string=STRING] [--merge|--no-merge]
[--comments|--no-comments] [--] TEST-COMMAND
The `--test-name', `--log-file' and `--trs-file' options are mandatory.
END
my $HELP = "$ME: TAP-aware test driver for Automake testsuite harness." .
"\n" . $USAGE;
# Keep this in sync with `lib/am/check.am:$(am__tty_colors)'.
my %COLOR = (
red => "\e[0;31m",
grn => "\e[0;32m",
lgn => "\e[1;32m",
blu => "\e[1;34m",
mgn => "\e[0;35m",
brg => "\e[1m",
std => "\e[m",
);
# It's important that NO_PLAN evaluates "false" as a boolean.
use constant NO_PLAN => 0;
use constant EARLY_PLAN => 1;
use constant LATE_PLAN => 2;
# ------------------- #
# Global variables. #
# ------------------- #
my $testno = 0; # Number of test results seen so far.
my $bailed_out = 0; # Whether a "Bail out!" directive has been seen.
my $parser; # TAP parser object (will be initialized later).
# Whether the TAP plan has been seen or not, and if yes, which kind
# it is ("early" is seen before any test result, "late" otherwise).
my $plan_seen = NO_PLAN;
# ----------------- #
# Option parsing. #
# ----------------- #
my %cfg = (
"color-tests" => 0,
"expect-failure" => 0,
"merge" => 0,
"comments" => 0,
"ignore-exit" => 0,
);
my $test_script_name = undef;
my $log_file = undef;
my $trs_file = undef;
my $diag_string = "#";
Getopt::Long::GetOptions
(
'help' => sub { print $HELP; exit 0; },
'version' => sub { print "$ME $VERSION\n"; exit 0; },
'test-name=s' => \$test_script_name,
'log-file=s' => \$log_file,
'trs-file=s' => \$trs_file,
'color-tests=s' => \&bool_opt,
'expect-failure=s' => \&bool_opt,
'enable-hard-errors=s' => sub {}, # No-op.
'diagnostic-string=s' => \$diag_string,
'comments' => sub { $cfg{"comments"} = 1; },
'no-comments' => sub { $cfg{"comments"} = 0; },
'merge' => sub { $cfg{"merge"} = 1; },
'no-merge' => sub { $cfg{"merge"} = 0; },
'ignore-exit' => sub { $cfg{"ignore-exit"} = 1; },
) or exit 1;
# ------------- #
# Prototypes. #
# ------------- #
sub add_test_result ($);
sub bool_opt ($$);
sub colored ($$);
sub copy_in_global_log ();
sub decorate_result ($);
sub extract_tap_comment ($);
sub finish ();
sub get_global_test_result ();
sub get_test_exit_message ();
sub get_test_results ();
sub handle_tap_bailout ($);
sub handle_tap_plan ($);
sub handle_tap_result ($);
sub is_null_string ($);
sub main (@);
sub must_recheck ();
sub report ($;$);
sub setup_io ();
sub setup_parser (@);
sub stringify_result_obj ($);
sub testsuite_error ($);
sub trap_perl_warnings_and_errors ();
sub write_test_results ();
sub yn ($);
# -------------- #
# Subroutines. #
# -------------- #
sub bool_opt ($$)
{
my ($opt, $val) = @_;
if ($val =~ /^(?:y|yes)\z/i)
{
$cfg{$opt} = 1;
}
elsif ($val =~ /^(?:n|no)\z/i)
{
$cfg{$opt} = 0;
}
else
{
die "$ME: invalid argument '$val' for option '$opt'\n";
}
}
# If the given string is undefined or empty, return true, otherwise
# return false. This function is useful to avoid pitfalls like:
# if ($message) { print "$message\n"; }
# which wouldn't print anything if $message is the literal "0".
sub is_null_string ($)
{
my $str = shift;
return ! (defined $str and length $str);
}
# Convert a boolean to a "yes"/"no" string.
sub yn ($)
{
my $bool = shift;
return $bool ? "yes" : "no";
}
TEST_RESULTS :
{
my (@test_results_list, %test_results_seen);
sub add_test_result ($)
{
my $res = shift;
push @test_results_list, $res;
$test_results_seen{$res} = 1;
}
sub get_test_results ()
{
return @test_results_list;
}
# Whether the test script should be re-run by "make recheck".
sub must_recheck ()
{
return grep { !/^(?:XFAIL|PASS|SKIP)$/ } (keys %test_results_seen);
}
# Whether the content of the log file associated to this test should
# be copied into the "global" test-suite.log.
sub copy_in_global_log ()
{
return grep { not $_ eq "PASS" } (keys %test_results_seen);
}
# FIXME: this can certainly be improved ...
sub get_global_test_result ()
{
return "ERROR"
if $test_results_seen{"ERROR"};
return "FAIL"
if $test_results_seen{"FAIL"} || $test_results_seen{"XPASS"};
return "SKIP"
if scalar keys %test_results_seen == 1 && $test_results_seen{"SKIP"};
return "PASS";
}
}
sub write_test_results ()
{
open RES, ">", $trs_file or die "$ME: opening $trs_file: $!\n";
print RES ":global-test-result: " . get_global_test_result . "\n";
print RES ":recheck: " . yn (must_recheck) . "\n";
print RES ":copy-in-global-log: " . yn (copy_in_global_log) . "\n";
foreach my $result (get_test_results)
{
print RES ":test-result: $result\n";
}
close RES or die "$ME: closing $trs_file: $!\n";
}
sub trap_perl_warnings_and_errors ()
{
$SIG{__WARN__} = $SIG{__DIE__} = sub
{
# Be sure to send the warning/error message to the original stderr
# (presumably the console), not into the log file.
open STDERR, ">&OLDERR";
die @_;
}
}
sub setup_io ()
{
# Redirect stderr and stdout to a temporary log file. Save the
# original stdout stream, since we need it to print testsuite
# progress output. Save original stderr stream, so that we can
# redirect warning and error messages from perl there.
open LOG, ">", $log_file or die "$ME: opening $log_file: $!\n";
open OLDOUT, ">&STDOUT" or die "$ME: duplicating stdout: $!\n";
open OLDERR, ">&STDERR" or die "$ME: duplicating stdout: $!\n";
*OLDERR = *OLDERR; # To pacify a "used only once" warning.
trap_perl_warnings_and_errors;
open STDOUT, ">&LOG" or die "$ME: redirecting stdout: $!\n";
open STDERR, ">&LOG" or die "$ME: redirecting stderr: $!\n";
}
sub setup_parser (@)
{
local $@ = '';
eval { $parser = TAP::Parser->new ({exec => \@_, merge => $cfg{merge}}) };
if ($@ ne '')
{
# Don't use the error message in $@ as set by TAP::Parser, since
# currently it's both too generic (at the point of being basically
# useless) and quite long.
report "ERROR", "- couldn't execute test script";
finish;
}
}
sub get_test_exit_message ()
{
my $wstatus = $parser->wait;
# Watch out for possible internal errors.
die "$ME: couldn't get the exit status of the TAP producer"
unless defined $wstatus;
# Return an undefined value if the producer exited with success.
return unless $wstatus;
# Otherwise, determine whether it exited with error or was terminated
# by a signal.
use POSIX qw (WIFEXITED WEXITSTATUS WIFSIGNALED WTERMSIG);
if (WIFEXITED ($wstatus))
{
return sprintf "exited with status %d", WEXITSTATUS ($wstatus);
}
elsif (WIFSIGNALED ($wstatus))
{
return sprintf "terminated by signal %d", WTERMSIG ($wstatus);
}
else
{
return "terminated abnormally";
}
}
sub stringify_result_obj ($)
{
my $result_obj = shift;
my $COOKED_PASS = $cfg{"expect-failure"} ? "XPASS": "PASS";
my $COOKED_FAIL = $cfg{"expect-failure"} ? "XFAIL": "FAIL";
if ($result_obj->is_unplanned || $result_obj->number != $testno)
{
return "ERROR";
}
elsif ($plan_seen == LATE_PLAN)
{
return "ERROR";
}
elsif (!$result_obj->directive)
{
return $result_obj->is_ok ? $COOKED_PASS: $COOKED_FAIL;
}
elsif ($result_obj->has_todo)
{
return $result_obj->is_actual_ok ? "XPASS" : "XFAIL";
}
elsif ($result_obj->has_skip)
{
return $result_obj->is_ok ? "SKIP" : $COOKED_FAIL;
}
die "$ME: INTERNAL ERROR"; # NOTREACHED
}
sub colored ($$)
{
my ($color_name, $text) = @_;
return $COLOR{$color_name} . $text . $COLOR{'std'};
}
sub decorate_result ($)
{
my $result = shift;
return $result unless $cfg{"color-tests"};
my %color_for_result =
(
"ERROR" => 'mgn',
"PASS" => 'grn',
"XPASS" => 'red',
"FAIL" => 'red',
"XFAIL" => 'lgn',
"SKIP" => 'blu',
);
if (my $color = $color_for_result{$result})
{
return colored ($color, $result);
}
else
{
return $result; # Don't colorize unknown stuff.
}
}
sub report ($;$)
{
my ($msg, $result, $explanation) = (undef, @_);
if ($result =~ /^(?:X?(?:PASS|FAIL)|SKIP|ERROR)/)
{
$msg = ": $test_script_name";
add_test_result $result;
}
elsif ($result eq "#")
{
$msg = " $test_script_name:";
}
else
{
die "$ME: INTERNAL ERROR"; # NOTREACHED
}
$msg .= " $explanation" if defined $explanation;
$msg .= "\n";
# Output on console might be colorized.
print OLDOUT decorate_result ($result) . $msg;
# Log the result in the log file too, to help debugging (this is
# especially true when said result is a TAP error or "Bail out!").
print $result . $msg;
}
sub testsuite_error ($)
{
report "ERROR", "- $_[0]";
}
sub handle_tap_result ($)
{
$testno++;
my $result_obj = shift;
my $test_result = stringify_result_obj $result_obj;
my $string = $result_obj->number;
my $description = $result_obj->description;
$string .= " $description"
unless is_null_string $description;
if ($plan_seen == LATE_PLAN)
{
$string .= " # AFTER LATE PLAN";
}
elsif ($result_obj->is_unplanned)
{
$string .= " # UNPLANNED";
}
elsif ($result_obj->number != $testno)
{
$string .= " # OUT-OF-ORDER (expecting $testno)";
}
elsif (my $directive = $result_obj->directive)
{
$string .= " # $directive";
my $explanation = $result_obj->explanation;
$string .= " $explanation"
unless is_null_string $explanation;
}
report $test_result, $string;
}
sub handle_tap_plan ($)
{
my $plan = shift;
if ($plan_seen)
{
# Error, only one plan per stream is acceptable.
testsuite_error "multiple test plans";
return;
}
# The TAP plan can come before or after *all* the TAP results; we speak
# respectively of an "early" or a "late" plan. If we see the plan line
# after at least one TAP result has been seen, assume we have a late
# plan; in this case, any further test result seen after the plan will
# be flagged as an error.
$plan_seen = ($testno >= 1 ? LATE_PLAN : EARLY_PLAN);
# If $testno > 0, we have an error ("too many tests run") that will be
# automatically dealt with later, so don't worry about it here. If
# $plan_seen is true, we have an error due to a repeated plan, and that
# has already been dealt with above. Otherwise, we have a valid "plan
# with SKIP" specification, and should report it as a particular kind
# of SKIP result.
if ($plan->directive && $testno == 0)
{
my $explanation = is_null_string ($plan->explanation) ?
undef : "- " . $plan->explanation;
report "SKIP", $explanation;
}
}
sub handle_tap_bailout ($)
{
my ($bailout, $msg) = ($_[0], "Bail out!");
$bailed_out = 1;
$msg .= " " . $bailout->explanation
unless is_null_string $bailout->explanation;
testsuite_error $msg;
}
sub extract_tap_comment ($)
{
my $line = shift;
if (index ($line, $diag_string) == 0)
{
# Strip leading `$diag_string' from `$line'.
$line = substr ($line, length ($diag_string));
# And strip any leading and trailing whitespace left.
$line =~ s/(?:^\s*|\s*$)//g;
# Return what is left (if any).
return $line;
}
return "";
}
sub finish ()
{
write_test_results;
close LOG or die "$ME: closing $log_file: $!\n";
exit 0;
}
sub main (@)
{
setup_io;
setup_parser @_;
while (defined (my $cur = $parser->next))
{
# Verbatim copy any input line into the log file.
print $cur->raw . "\n";
# Parsing of TAP input should stop after a "Bail out!" directive.
next if $bailed_out;
if ($cur->is_plan)
{
handle_tap_plan ($cur);
}
elsif ($cur->is_test)
{
handle_tap_result ($cur);
}
elsif ($cur->is_bailout)
{
handle_tap_bailout ($cur);
}
elsif ($cfg{comments})
{
my $comment = extract_tap_comment ($cur->raw);
report "#", "$comment" if length $comment;
}
}
# A "Bail out!" directive should cause us to ignore any following TAP
# error, as well as a non-zero exit status from the TAP producer.
if (!$bailed_out)
{
if (!$plan_seen)
{
testsuite_error "missing test plan";
}
elsif ($parser->tests_planned != $parser->tests_run)
{
my ($planned, $run) = ($parser->tests_planned, $parser->tests_run);
my $bad_amount = $run > $planned ? "many" : "few";
testsuite_error (sprintf "too %s tests run (expected %d, got %d)",
$bad_amount, $planned, $run);
}
if (!$cfg{"ignore-exit"})
{
my $msg = get_test_exit_message ();
testsuite_error $msg if $msg;
}
}
finish;
}
# ----------- #
# Main code. #
# ----------- #
main @ARGV;
# Local Variables:
# perl-indent-level: 2
# perl-continued-statement-offset: 2
# perl-continued-brace-offset: 0
# perl-brace-offset: 0
# perl-brace-imaginary-offset: 0
# perl-label-offset: -2
# cperl-indent-level: 2
# cperl-brace-offset: 0
# cperl-continued-brace-offset: 0
# cperl-label-offset: -2
# cperl-extra-newline-before-brace: t
# cperl-merge-trailing-else: nil
# cperl-continued-statement-offset: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "my $VERSION = "
# time-stamp-format: "'%:y-%02m-%02d.%02H'"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
Mini Shell